Note: This article is discontinued.
You can find the current article here: 5093440 / Combination arrester V50, 1-pole 150 V
- Product description
-
Product description
CombiController upper part– type 1+2 combination arrester
• Plug-in upper part can be fitted into the base without tools or current interruption
• Incl. thermal and dynamic cut-off unit and visual display of defects
• High current conductivity and long service life
Plug-in arrester
- Technical data
-
Connectivity options
Arrester surge current (8/20 µs) [total] 30 kA Blow-out no Conductor cross-section, flexible (fine-wire), min. 25 mm² Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm² DC network form no Dimension 150V Installation type On basic element Integrated back-up fuse no IT network form no Lightning protection zone LPZ 0→2 Lightning surge current (10/350 μs) 12,5 kA Lightning surge current (10/350) 12,5 kA Max. mains-side overcurrent protection 125 Maximum back-up fuse 125 A Maximum continuous voltage AC 150 V Maximum continuous voltage DC 200 V Maximum discharge current (8/20 μs) 50 kA Nominal discharge current (8/20 µs) 30 kA Nominal discharge current (8/20 µs) [L-N] 30 kA Nominal voltage AC (50/60 Hz) 130 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Other network form no Pole number 1 Pole version 1 Protection level [L-N] ≤1,0 Protection rating IP20 Remote signalling no Response time <25 ns Signalling on device Visual SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 Class I+II TN network form no TN-C network form no TN-C-S network form no TN-S network form no TT network form no Version for 1-pole upper part - All types
- Downloads
-
Data sheet V 50-B+C 0-150 / 5094400 , 0.17MB , pdfCatalogue Überspannungsschutz , 28.42MB , pdfDeclaration of conformity V 50-B+C 0-150 / 5094400 , 0.04MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdf