Note: This article is discontinued.
You can find the current article here: 5088455 / Generator connection box, type 2, for 4 strings
- Product description
-
Product description
System solution for photovoltaic inverter with 1 separate MPP tracker
• Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE 0100-712 (50539-12)
• Low DC protection level: < 4.0 kV (Voc max = 1,000 V DC with V20-B+C/0-500PV)
• Per protection device, there are 8 terminals up to 6 mm² pre-mounted in the housing, up to 30 A DC per terminal
• Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside, including cable gland kit
For DC protection of the inverter in photovoltaic systems.
If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary!
- Technical data
-
Connectivity options
Anschlussart Generatoranschlusskasten Tension spring terminal Cable type for surge protection devices Power cable DC (PV) Conductor cross-section, flexible (fine-wire), min. 6 mm² Conductor cross-section, rigid (single-wire/multiwire), max. 10 mm² Conductor cross-section, rigid (single-wire/multiwire), min. 0,5 mm² DC network form yes Dimension 1000V DC Entries per MPPT 4 Exits per MPPT 4 Housing material surge protection components PC Installation type Pre-mounted in the housing IT network form no Lightning protection zone LPZ 1→2 Max. mains-side overcurrent protection 125 Max. PV voltage 1000 V Maximum back-up fuse 125 A Maximum continuous voltage DC 1000 V Maximum discharge current (8/20 μs) 40 kA Network form DC Nominal discharge current (8/20 µs) 20 kA Number of MPPTs 1 Operating temperature, max. 80 °C Operating temperature, min. -40 °C Other network form no Pole version 3 Protection rating IP66 Remote signalling no Response time <25 ns Short-circuit resistant yes Signalling on device Visual SPD to EN 61643-11 Type 2 SPD to IEC 61643-1 Class II Test class, type 2 yes TN network form no TN-C network form no TN-C-S network form no TN-S network form no TT network form no Version for Type 2 in housing with terminals - All types
- Downloads
-
Data sheet PVG-C1000K 400 / 5088657 , 0.32MB , pdfDeclaration of conformity PVG-C1000K 400 / 5088657 , 0.11MB , pdfLabel approval VDE test report V20-PH , 0.05MB , pdfLabel approval DEKRA test report V20-PH , 0.08MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdfMounting instructions Mounting instructions PVG-BC PVG-C , 0.14MB , pdf